TF‑K Torcofix K

• Use:
• Controlled screw tightening in the most common range of 20 - 850 N·m / 15 - 630 lbf·ft
• Adjustable, releasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the trades
• Features:
• Classified as per DIN EN ISO 6789-2:2017 Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%
• Incl. traceable test certificate (DIN EN ISO 6789-2:2017)
• For controlled right- and left-hand tightening (reposition square tool for change of direction)
• 1/2" mushroom head square with ball lock. From 3/4" with square socket and pin retention
• Robust, matt powder-coated tubular steel construction, with galvanized ratchet and high-quality plastic parts
• New ergonomic handle, shaped according to the natural grip position of the hand
• Clearly recognisable and tactile hand centring aid and calibration aid in the middle of the handle
• Double scale N·m / lbf·ft and vernier are protected from abrasion and contamination by an enlarged viewing window
• With vernier scale for N·m main scale for setting intermediate scale values; lbf-ft setting only via main scale
• Vertical alignment of the scale, torque adjustment therefore suitable for left and right handers
• Scale line positioned directly above the scale prevents reading errors (parallax errors)
• Unit labeling integrated in the scale frame and also protected by viewing windows,
• Precise jump-off mechanism generates a clearly perceptible and audible trigger signal when the set torque value is reached
• Incl. roll away protection, prevents rolling away when the tool is put down

Information

• Drive connector square male: 1/2"
• Contents (Qty of pieces): 1 tlg.
• Torque range (min./max.): -
• Torque range (min./max.): -
• Total width [mm]: 44 mm
• Material: Tubular steel construction, top-grade plastic parts
• Drive connector square male: 12,5 mm
• Return angle: 7,5 °
• Head height 1 [mm]: 36 mm
• No. of teeth: 48
• Width of head 1 [mm]: 44,0 mm
• housing to square drive: 22 mm
• Drive type/drive: Mushroom head
• vernier Nm: 1 N·m
• Standard: DIN 3120 - A 12,5 ISO 1174
• REACH registration available: 0
• Trigger mechanism: Short path triggering
• Precision +/-: +/- 3 %
• Tightening direction: Left and right
• Fixed setting: 0
• Test certificate: DIN EN ISO 6789-2:2017
• Scale division [n-m]: 10 N·m
• Target groups: Automotive Industry Construction and commercial vehicles Consumer Energy Mechanical engineering Workshop Service Agriculture Oil & Gas Utilities
• Range of application: Assembly Production Maintenance and repair
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :