Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
Square drive as per DIN 3120, ISO 1174, with ball retention groove
2C reversible ratchet 1/4" + 1/2": lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
Square plug-in handle 1/4", 1-component handle with female square
Socket wrench insert 1/4" 1/2": hexagon, metric, short and long version according to DIN 3124, ISO 2725
Spark plug socket 1/2" with pressed-in holding rubber
Spark plug socket 1/2" with pressed-in holding rubber and extra drive hex Size 24
Screwdriver bit socket 1/4" 1/2", for hexagon socket screws: With pressed-in, phosphated pin
Screwdriver bit socket 1/4", slotted, PH, PZ, TX with hole: With pressed-in, phosphated pin
Cross handle with sliding piece 1/4" 1/2": Design according to DIN 3122, ISO 3315
Socket extension 1/4"+ 1/2"
Universal joint 1/4" 1/2": joint screwed, design according to DIN 3123 - C 12,5
Adjustable wrench, 15° jaw position, head polished with laser-marked scale
Chrome-vanadium steel, matt satin chrome-plated
Ring ratchet open-end wrench: Following DIN 3113, ISO 3318, straight form, ratchet mechanism with 72 teeth, swing back angle 5°, jaw position 15°, surface satin matt chrome-plated, chrome-vanadium steel
Double open-ended spanners: Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102, jaw set at 15°, matt satin chrome-plated finish, chrome-vanadium steel
Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel
Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged
Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel
Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle
Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
Information
Contents (Qty of pieces):129
Material:Foam
REACH:compliant
Gedore Torque Catalogue
Please select from the options below to either view, download a catalogue now in PDF format or to receive a copy by post.